Macro Sticky

[Kelaan]

This lets you use world marker flares from your toolbar.

/click CompactRaidFrameManagerDisplayFrameLeaderOptionsRaidWorldMarkerButton
/click DropDownList1Button#

WHAT. We can place flares now, instead of having to keep stacks of engineering flares all over? Awesome!

[Neptuno]

I ran across this on the official forums and it's been extremely useful for me. This lets you use world marker flares from your toolbar.

/click CompactRaidFrameManagerDisplayFrameLeaderOptionsRaidWorldMarkerButton
/click DropDownList1Button#

Replace # with the number for the desired color:
1=blue
2=green
3=purple
4=red
5=white
6=clear all

what would be AMAZING is if we could have a button that works like the Hunter/Lock pet button that you click on it and it expands out to show the flares.

[Neptuno]

Code: Select all

/run if IsMounted() then Dismount() return end local m if not IsFlyableArea() or (GetWintergraspWaitTime()==nil and GetZoneText()=="Wintergrasp") then m=(41) else m=(86) end CallCompanion("MOUNT",m)

unfortunately, 4.0 broke the WG timer portion of this, but it works everywhere else. if i ever get the turtle, there's a thing to place in there for that too...

[claisa]

Emergency 3 holy power WoG

Not built it yet but bored at work and just occured to me

/cast Divine Please
/cancel Aura Divine Plea
/cast word of glory

So whilst they have nerfed the word of glory a bit, it maybe easier to do back to back to back casts during heavy dam.

[Zalaria]

Emergency 3 holy power WoG

Not built it yet but bored at work and just occured to me

/cast Divine Please
/cancel Aura Divine Plea
/cast word of glory

So whilst they have nerfed the word of glory a bit, it maybe easier to do back to back to back casts during heavy dam.

Isn't Divine Plea on the GCD? You probably need something like

Code: Select all

/cancelaura Divine Plea
/castsequence Divine Plea, Word of Glory

[Turp]

Although some may find this style of macro controversial, it works. Much as the old 969 style macros did pre-4.0x. I borrowed the original idea for these macro from other locations and modified them some; others are commonly used.

-For all of these macros, just select the question-mark "?" icon at the start of the icon list. The icon will change for you as you use the macros.

This is Macro 1-AOE/general use.
#showtooltip
/startattack
/castsequence [mod:alt] Hammer of Wrath; reset=3 Hammer of the Righteous, Judgement, Hammer of the Righteous, Avenger's Shield, Hammer of the Righteous, Shield of the Righteous
/cast Avenging Wrath

This is Macro 1-Single target use.
#showtooltip
/startattack
/castsequence [mod:alt] Hammer of Wrath; reset=3 Crusader Strike, Judgement, Crusader Strike, Avenger's Shield, Crusader Strike, Shield of the Righteous
/cast Avenging Wrath

This is Macro 2. (inquisition can be replaced with word of glory or sotr; also remove AT or replace if not a BE.)
#showtooltip
/startattack
/castsequence [nomod] reset=15 Holy Wrath, Hammer of the Righteous, Consecration, Word of Glory
/cast [nomod] Arcane Torrent
/cast [mod:alt] Divine Plea
/cast [mod:alt] Inquisition

The bases of this macro is setup around being talented into Grand Crusader. (20% chance to reset AS with cs or hotr use) You spam macro 1 until avengers shield is on a long cooldown from grand crusader not proc'ing; when this happens you will have 2 holy power.

You then spam macro 2 until you have no holy power remaining & macro 1 will be reset to start fresh. Would recommend being talented into Guarded by the Light or replacing WoG at the end of the 2nd macro with sotr.

I would also recommend having Glyph of Focused shield to do more AS damage and not hit extra targets with macro 1 for single target (also do not use macro 2, since it is aoe with macro 1 single target.) There are some pulls where you just do not want to hit extra targets. Also note that these macros have on alt press modifier uses.

Use of these macros still requires an understanding of your class to play properly, you can not just mindlessly spam these. There are many situations where you need more aoe or need to break the macro by using AS and/or improved judgement to pull targets to you. Don't just taunt and run in, be mindful of how your abilities work!

This macro uses HoF and both trinkets, a 1 button "oh crap" button.
#showtooltip
/cast Hand of Freedom
/use 13
/use 14

Yet another "oh crap" button. Press it once to active DS, again to turn it off.
#showtooltip
/cancelaura Divine Shield
/cast Divine Shield
This will free you from almost anything, but you will drop all threat; be sure to taunt and reacquire the mob immediately if used.

This is a 1 button taunt. Target a mob to taunt with HoR; target a friendly target to taunt off them with RD.
#showtooltip
/cast [help] Righteous Defense; Hand of Reckoning

This is a general use focus macro.
/focus [target=mouseover,exists][exists]
/stopmacro [target=mouseover,exists][exists]
/clearfocus
It will focus your target, if no target exists it focuses you mouse over target. If a focus does exist and pressed again, it will clear your focus.

This is an oldschool mount macro that puts up crusader aura when mounting and dev. aura when dismounting.
/cast [nomounted] !Crusader Aura
/cast [nomounted, noflyable] Summon Charger; [nomounted, flyable] Bronze Drake;
/cast [mounted] !Devotion Aura
/dismount [mounted]
I have this modified in-game to also work with the seahorse, i am sure this can be scripted easier. If you do use this replace mount names with your mounts.

I have some other macros i use also, but this is the basics of what i am using at the moment.

What do you all think of these?
There are those who say this style of macro takes away from playing the game, but there are those who mouse click, those who key-spam and those who prefer heavy macro use; as-well as a mixture of the 3.

[Dianora]

/targetexact [nodead] The Abominable Greench
/run if GetRaidTargetIndex("target")~=6 then SetRaidTarget("target",6)end

Change The Abominable Greench to whatever you're looking for, and it'll target the live target and place a square symbol on it. You can also add a line of instant spell like Judgement.

[Sur-Pseudo]

Chloe, Hope you update the first post at some point, would hate for these macro's to get burried so deep in the thread where people probably wont look for them >.>

Guardian of Ancient Kings, spamable (without spammed announcement) --

Code: Select all

#showtooltip
/run if not timeElapsed or GetTime() > timeElapsed + 3 then SendChatMessage("~~~ 50% BUBBLE WALL ATTEMPTED ~~~ (18 Second Duration)", "RAID") timeElapsed = GetTime() end
/cast Guardian of Ancient Kings

For the above:
"timeElapsed + 3" ----- Change "3" to any number in seconds you want before it attempts to resend the chat message
SendChatMessage -- Change text in first set of Quotes ("") to what you want sent to the chat channel noted in the 2nd set of quotes (e.g. "RAID" or "SAY")

Using that posted code and the info given, you can make macro's for all CD's you might spam out of habit, or "zomg go off as soon as you're off CD I need you right now!"

Another Example, using Rebuke to Say:

Code: Select all

#showtooltip Rebuke
/run if not timeElapsed or GetTime() > timeElapsed + 8 then SendChatMessage("INTERRUPT, 10 sec CD", "SAY") timeElapsed = GetTime() end
/cast Rebuke

I put timeElapsed at 8 seconds... I want to make sure it's ready to send the message by the 10th second, but filter out anything in between (think, Nef phase 2).. I figure 2 seconds is enough for any lag/script time.. I would not trust 10 seconds, and I'm not sure how safe 9 seconds is.. so 8 is my chosen number, you can change it to what you like.


Personall I use this macro for:
Divine Protection
Guardian of Ancient Kings
Divine Guardian
Ardent Defender
Rebuke
Pull


Which reminds me:

Code: Select all

#showtooltip Exorcism
/run if not timeElapsed or GetTime() > timeElapsed + 9 then SendChatMessage("PULL IN ~4 seconds", "RAID_WARNING") timeElapsed = GetTime() end
/castsequence reset=60 Divine Plea, Inquisition, Avenging Wrath, Exorcism

I'm not sure if that was posted already, I was really looking for the run/timer macro and didn't see that before, not sure if this thread has the pull macro yet.

Anyway, the macro I use says ~4 seconds, even though unhasted it can take up to 4.5 seconds... However with lag and visual reaction time to seeing the message, it gives people a (hopefully) slightly (very slightly) more delayed pull then expected.. Helpful for pre-cast or pre-pot raiders.. and lets you spam the crap out of the macro to pull

[Era]

Hey there!

I've got two macros I was wondering if someone could take a look at for me. One is for avoidance and the other is for calculating dodge/parry rating numbers.

I found the avoidance one on this forum, and the other through some Googling, but I don't know anything about the macro coding and they might be outdated, so I'd very much like to know if they would produce correct numbers!

Avoidance

Code: Select all

/script DEFAULT_CHAT_FRAME:AddMessage("Need 102.4 combat table coverage, 85.1 unbuffed. Currently at: "..string.format("%.2f", GetDodgeChance()+GetBlockChance()+GetParryChance()+5))

Parry/Dodge

Code: Select all

/run local _,strength = UnitStat("player",1); ChatFrame1:AddMessage(format("Dodge rating should be this much higher than parry while unbuffed: %.2f",(strength * 0.05 + 549 * 1.05) * 0.27))

I'd also like to know if they'd stay correct in 4.2, at least if we presume there won't be any further changes to our class and the general mechanics?

[Fetzie]

You can verify the first one by simply adding up your avoidances and block chance (don't forget the 5% miss) and seeing if you get the same number, which you should. The second one looks OK too.

[Chicken]

The second one is actually only meant for use in 4.2 and isn't accurate for now in 4.1.

[Era]

You can verify the first one by simply adding up your avoidances and block chance (don't forget the 5% miss) and seeing if you get the same number, which you should. The second one looks OK too.

Aye, already done the maths and it seems to work fine. Just making sure! ^^

The second one is actually only meant for use in 4.2 and isn't accurate for now in 4.1.

And yeah, I'm aware, sorry if my wording in the original post was misleading.


Thanks guys!

[Kahlan]

This has probably been asked already but not finding the answer.
Im normally a healer so tend to use grid and clique but I have started tanking recently and used the addon =Tauntmaster but im fed up with having tauntmaster and grid+clique so thought I would sort out the macros to tank on clique but im unable to setup one for Hand of Reckoning that works with grid + clique any help please.

Kahlan

[Fetzie]

Hand of Reckoning is a spell cast on hostile units. I guess you could try

Code: Select all

/cast [@mouseover,nodead,harm]Hand of Reckoning

but I don't see how you would use this on your Grid. You can, however, use Righteous Defense together with Grid+Clique, as it is a spell cast on friendly units (mostly players, but enemies attacking friendly NPC will often also react to it)

[Kahlan]

Yeah I understand that and was confused myself its just Tauntmaster was able to do it but that is out of date now and playing up.
Nevermind worked it out myself with grid+clique it's:- /cast [target=mouseovertarget] Hand of Reckoning

tested and works
Thanks for your advice though
Kahlan

[Winkle]

Yeah I understand that and was confused myself its just Tauntmaster was able to do it but that is out of date now and playing up.
Nevermind worked it out myself with grid+clique it's:- /cast [target=mouseovertarget] Hand of Reckoning

tested and works
Thanks for your advice though
Kahlan

How on earth is that macro working? As far as i can tell you're just attempting to taunt one of your own raid members unless your grid shows focus targets or the like.

[Torias]

"mouseovertarget" means the "Target of mouseover". It's like saying @targettarget, for "Target of target".

[Tenvelden]

Avoidance

Code: Select all

/script DEFAULT_CHAT_FRAME:AddMessage("Need 102.4 combat table coverage, 85.1 unbuffed. Currently at: "..string.format("%.2f", GetDodgeChance()+GetBlockChance()+GetParryChance()+5))

This macro is good to find your total mitigation and the goal is 102.4. But I know of no buff that will magically get you from 85.1 all the way up to 102.4. This is misleading and wrong.

[jere]

Avoidance

Code: Select all

/script DEFAULT_CHAT_FRAME:AddMessage("Need 102.4 combat table coverage, 85.1 unbuffed. Currently at: "..string.format("%.2f", GetDodgeChance()+GetBlockChance()+GetParryChance()+5))

This macro is good to find your total mitigation and the goal is 102.4. But I know of no buff that will magically get you from 85.1 all the way up to 102.4. This is misleading and wrong.

The post you quoted was from back in April, when it was probably true. I would suggest reporting any post so a moderator can fix it. A simple "hey I think this might be out of date now" in the report message will probably work.

[JU1CYFRU1T]

Sorry for bringing this thread back from the dead... but I didn't want to start a new one when my question is about a macro (and there is a macro sticky).

I am trying to find a LoH macro that I saw once upon a time, and for the life of me I can't find it again.

I am looking for a macro that will cast LoH on my focus target (if I have one) and if I don't have one, it will cast LoH on myself. We are currently re-working through heroics with a new group, and since LoH doesn't trigger a stack from the Purple on Yorsaj, I want to be able to LoH our Bear while I'm playing Ret.

I, personally, HATE modifiers, because then I have to rely on something that isn't in my muscle-memory in order to save the tank. I'd rather it just be a one button, no 'thought' type action. I tried looking it up on several different forums, and other info sites, but I can't find the one I'm looking for. From what I remember, it looked like this:

Code: Select all

#showtooltip Lay on Hands
/cast [target=focustarget][] Lay on Hands
/targetlasttarget

I don't know if that is right, but when I try to use it, it isn't working correctly. What am I missing?

[KysenMurrin]

#showtooltip Lay on Hands
/cast [target=focus,exists][] Lay on Hands

Need to put in "exists" or it'll stop if there's no focus target.
You don't need the /targetlasttarget because you've not changed targets.

[JU1CYFRU1T]

THANK YOU SO MUCH!!! It was such a hastle having to manually target the tank cast this.

[Riânnon]

When holding down Alt (can be changed to Shift or Ctrl) will cast Holy Prism on you, without the modifier pressed will cast it on your current target.

Code: Select all

#showtooltip Holy Prism
/cast [mod:alt, @player] Holy Prism;Holy Prism

[Knievel]

I'm a decent Tankadin. However, for questing and dailies I'm going Ret and trying to get some gear (that was the easy part), and a good dps rotation. I know the following is obsolete, but can somebody help me modernize it for MoP:

This is Macro 1-AOE/general use.
#showtooltip
/startattack
/castsequence [mod:alt] Hammer of Wrath; reset=3 Hammer of the Righteous, Judgement, Hammer of the Righteous, Avenger's Shield, Hammer of the Righteous, Shield of the Righteous
/cast Avenging Wrath

This is Macro 1-Single target use.
#showtooltip
/startattack
/castsequence [mod:alt] Hammer of Wrath; reset=3 Crusader Strike, Judgement, Crusader Strike, Avenger's Shield, Crusader Strike, Shield of the Righteous
/cast Avenging Wrath

This is Macro 2. (inquisition can be replaced with word of glory or sotr; also remove AT or replace if not a BE.)
#showtooltip
/startattack
/castsequence [nomod] reset=15 Holy Wrath, Hammer of the Righteous, Consecration, Word of Glory
/cast [nomod] Arcane Torrent
/cast [mod:alt] Divine Plea
/cast [mod:alt] Inquisition

[degre]

When holding down Alt (can be changed to Shift or Ctrl) will cast Holy Prism on you, without the modifier pressed will cast it on your current target.

Code: Select all

#showtooltip Holy Prism
/cast [mod:alt, @player] Holy Prism;Holy Prism

Don't know why you would macro something that the game does already by itself. I think by default it's shift+click to target self and there should be an option somewhere to change it to whatever key you prefer.