A Call to Arms - MoP Mechanics Testing

Warning: Theorycraft inside.

Moderators: Fridmarr, Worldie, Aergis, theckhd

Re: A Call to Arms - MoP Mechanics Testing

Postby theckhd » Tue Jul 03, 2012 12:32 pm

No, that's fine, I just need to know which weapon it was so I can try to fit the weapon-damage-based skills.
"Theck, Bringer of Numbers and Pounding Headaches," courtesy of Grehn|Skipjack.
Simcraft 6.x, Call to Arms 6.0, Talent Spec & Glyph Guide 6.x, Blog: Sacred Duty
User avatar
theckhd
Moderator
 
Posts: 8029
Joined: Thu Jul 31, 2008 3:06 pm
Location: Harrisburg, PA

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Tue Jul 03, 2012 4:37 pm

well, let me know if you need more tests, the best time to hit the lvl 85 dummies is between 6am and 8am CST -_-
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby theckhd » Thu Jul 05, 2012 5:50 am

There's definitely something wrong with some of the #28 data sets. In looking at the data for Judgement, Holy Wrath, Consecration, and SotR data, the third data set is definitely off. It consistently falls above the best fit by too large a margin. My guess is that the reported SP value is incorrect for that data set. If you look at the AP/SP ratio for each set:
Code: Select all
1    2.0000
2    1.9704
3    2.0372
4    2.0000
5    1.9997


1, 4, and 5 are all exactly a 2:1 ratio, as they should be. Set 2 is too low (meaning either SP is too high, or AP is too low). Set 3 is too high, likely meaning SP is too low. Oddly enough, if I try fits using AP, the last four data points line up very well, but the first one is off (too high). Which is sort of odd. Is there any way you can double-check the stats of the five gear sets you used?

With a large systematic error like that, I can't really trust the data to give me good estimates. I'm going to need more data sets, ideally spanning a larger range of SP. One data set should be taken naked with only a white weapon/shield, and it'd be ideal to have data sets every ~1000 SP between 0 and 10k-15k (whatever's reachable in beta-available gear). For J, Cons, HW, and SotR you really only need a couple casts, as the damage value is static (+/- 1 damage, which is insignificant). It's the other abilities that we need large sample sizes for, since they have a wide damage range.
"Theck, Bringer of Numbers and Pounding Headaches," courtesy of Grehn|Skipjack.
Simcraft 6.x, Call to Arms 6.0, Talent Spec & Glyph Guide 6.x, Blog: Sacred Duty
User avatar
theckhd
Moderator
 
Posts: 8029
Joined: Thu Jul 31, 2008 3:06 pm
Location: Harrisburg, PA

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Thu Jul 05, 2012 5:56 am

Lemme start working on new sets then.

I prefer to do things from scratch -- specially since I can't remember what gear I had on at the time.

what white shield would you recommend?
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby theckhd » Thu Jul 05, 2012 6:12 am

Any vendor shield is fine. The point was just that it wouldn't have stats on it. If I recall correctly, you need a shield equipped to cast SotR (and AS).

Under ideal circumstances, I'd like 3-5 casts of the static abilities (J, Cons, HW, SotR) and 100+ casts of the variable ones (CS, HotR, AS, Hammer of Wrath). Seal of Truth, melee, and Censure should have sufficient data automatically, so don't worry about counting them.

I'm not in a huge hurry for the data - I'm moving this weekend, so I'll be rather busy either way. Hence, I'd rather see you take data slowly and methodically (i.e. take one complete data set naked, post stats and data, then move on to the next test). It's critical that the AP/SP are reported properly, because an error there will taint the entire data set (like #3, I suspect). It's also important that the dummy doesn't have debuffs, though most of your tests were fine in that regard. I couldn't tell with the tests against the 85 dummy, because there were people hitting other level 85 dummies and the log wouldn't tell me which ones were which.

Actually, there might be a simple solution to that. Just observing the combat log, cast Judgment on an 85 dummy and then again on a level 93 dummy. If the damage is identical (or +/- 1), then there's no inherent spell damage reduction (which there shouldn't be - it was removed in Cata). If so, then you can just do all of the tests on the 93 dummy in one giant log file, if that's easier.

I'm not sure where the most isolated dummies would be for horde. I can usually do pretty well in Darnassus or Exodar, but I'm not sure whether Silvermoon is as empty. Are there dummies at the Echo Isles now?
"Theck, Bringer of Numbers and Pounding Headaches," courtesy of Grehn|Skipjack.
Simcraft 6.x, Call to Arms 6.0, Talent Spec & Glyph Guide 6.x, Blog: Sacred Duty
User avatar
theckhd
Moderator
 
Posts: 8029
Joined: Thu Jul 31, 2008 3:06 pm
Location: Harrisburg, PA

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Thu Jul 05, 2012 6:39 am

I've only been able to find lvl 85 dummies in orgrimmar

but i just tested Judgement on a lvl 93 and a lvl 85 dummy and the difference is -/+ 1, as you said, so should I stick to lvl 93 dummies instead?
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby theckhd » Thu Jul 05, 2012 6:46 am

Yeah, given that information, 93 dummies can be used for everything. In fact, you could use any level dummy for the spell damage ones, it's only the weapon/physical damage ones (melee, CS, HotR) that absolutely have to be level 93 (because armor values change with dummy level).

I'm trying to get what I can out of the data sets you provided as we speak, using tweaked spellpower values (modifying the third one to be exactly half of the AP value). I think I've convinced myself that your Judgement data is consistent with the tooltip values (though again, a low- or zero-sp data point would help that a lot).

<edit> after some more testing, I think that the AP values from sets 2-4 are correct, but the SP values from 2 & 3 are off (as indicated by the ratios). In addition, both values from set 1 are wrong (both too high). If I fit vs. AP, values from sets 2-5 all fit very, very well with the tooltip formula for Judgment. But the first data point is always very low, and drags the intercept down. So far, I'm concluding that I can use sets 2-5 under the assumption that the AP data is correct, but I'll have to toss set 1 unless further data suggests it's correct.
"Theck, Bringer of Numbers and Pounding Headaches," courtesy of Grehn|Skipjack.
Simcraft 6.x, Call to Arms 6.0, Talent Spec & Glyph Guide 6.x, Blog: Sacred Duty
User avatar
theckhd
Moderator
 
Posts: 8029
Joined: Thu Jul 31, 2008 3:06 pm
Location: Harrisburg, PA

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Thu Jul 05, 2012 6:58 am

don't worry, I'm doing new sets -- just to verify things

Here is the first one.

Naked
Str 176
Agi 107
Sta 332
Int 117
AP 602
SP 301
Haste 0
Hit 0
Crit 5.01
Exp 0

The problem I had with the first set 1 was that I used an epic shield -- that's why it's out of whack
Attachments
#28 - naked.zip
(33.19 KiB) Downloaded 71 times
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Thu Jul 05, 2012 9:32 am

Code: Select all
         set #1   set #2  set #3  set #4
Str      1624     2953    4481    5931
Agi      107
Sta      3244     5675    8587    11365
Int      117   
AP       3498     6156    9212    12112
SP       1749     3078    4606    6056
Haste    0        0.76    3.07    3.07
Hit      0        0.62    0.62    1.97
Crit     5.36     5.36    6.30    7.31
Exp      2.55     3.89    3.89    3.89


I'll have more sets after the server reset.
Attachments
#28 - set 1.zip
(218.93 KiB) Downloaded 68 times
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Thu Jul 05, 2012 10:43 am

Code: Select all
      set #5  set #6  set #7
Str   7580    8690    10566
Sta   15355   17365   
AP    15410   17630   21382
SP    7705    8815    10691
Haste 4.40    4.40
Hit   1.97    3.37
Crit  8.53    8.53
Exp   3.89    3.89

Attachments
#28 - set 5.zip
(127.45 KiB) Downloaded 66 times
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Thu Jul 05, 2012 10:44 am

Set 6 and 7 data
Attachments
#28 - set 6-7.zip
(174.57 KiB) Downloaded 69 times
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby theckhd » Thu Jul 05, 2012 2:10 pm

Data set for #29, using a rogue:
AGI: 3650
AP: 9562
crit: 25.92%
haste: 21.47% (plus procs from arrow of time and the hungerer)

~1.5 hours on a level 70 target dummy:
http://www.worldoflogs.com/reports/ii5v ... details/0/
~2.5 hours on a level 85 target dummy:
http://www.worldoflogs.com/reports/ijv9 ... etails/21/
"Theck, Bringer of Numbers and Pounding Headaches," courtesy of Grehn|Skipjack.
Simcraft 6.x, Call to Arms 6.0, Talent Spec & Glyph Guide 6.x, Blog: Sacred Duty
User avatar
theckhd
Moderator
 
Posts: 8029
Joined: Thu Jul 31, 2008 3:06 pm
Location: Harrisburg, PA

Re: A Call to Arms - MoP Mechanics Testing

Postby theckhd » Thu Jul 05, 2012 2:11 pm

Thanks Klaud, I've entered all of the data in and am starting to fit it. So far the static abilities are fitting beautifully. I haven't started on the ones that depend on weapon damage yet, probably tomorrow or this evening.

Weapon was still a club, right?
"Theck, Bringer of Numbers and Pounding Headaches," courtesy of Grehn|Skipjack.
Simcraft 6.x, Call to Arms 6.0, Talent Spec & Glyph Guide 6.x, Blog: Sacred Duty
User avatar
theckhd
Moderator
 
Posts: 8029
Joined: Thu Jul 31, 2008 3:06 pm
Location: Harrisburg, PA

Re: A Call to Arms - MoP Mechanics Testing

Postby Klaudandus » Thu Jul 05, 2012 2:15 pm

yes, club.

Let me know if you need granularity for the tests, the way I did it is that each set increments the pieces of gear by 2. So I start naked, then I add helm and neck, then next set is shoulders and cloak and so on -- let me know if you need odd number of pieces equipped just to verify and I'll get on that.
The Element of Forum Hyperbole
Image
---
Flüttershy - Draenei Protection Paladin, Aerie Peak
Klaudandus - BE Protection Paladin, Feathermoon (Semi-retired)
User avatar
Klaudandus
 
Posts: 11259
Joined: Thu Apr 02, 2009 7:08 am
Location: Texas' Armpit

Re: A Call to Arms - MoP Mechanics Testing

Postby theckhd » Thu Jul 05, 2012 2:38 pm

Are you sure you used a club for the first round of testing? Because something isn't adding up. For example, this time around, in set #7 with 21k AP, your CS is hitting for 4777-4780. In set #5 from a few weeks ago, with 19.8k AP, you were hitting for 10713-15790. Not only are the values much larger, but the range is much larger. I haven't had time yet to figure out what I expect from the formulas, but just looking at the data, something looks fishy.
"Theck, Bringer of Numbers and Pounding Headaches," courtesy of Grehn|Skipjack.
Simcraft 6.x, Call to Arms 6.0, Talent Spec & Glyph Guide 6.x, Blog: Sacred Duty
User avatar
theckhd
Moderator
 
Posts: 8029
Joined: Thu Jul 31, 2008 3:06 pm
Location: Harrisburg, PA

PreviousNext

Return to Advanced Theorycraft and Calculations

Who is online

Users browsing this forum: No registered users and 1 guest

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 380 on Tue Oct 14, 2008 6:28 pm

Users browsing this forum: No registered users and 1 guest