Page 4 of 6

Re: My Power Auras

PostPosted: Fri Oct 29, 2010 6:16 am
by Nikachelle

Re: My Power Auras

PostPosted: Fri Oct 29, 2010 8:16 am
by Arcand
Doxa, I'll move this over to the UI forum later today unless you ask me not to.

Re: [Power Auras] Exports Thread

PostPosted: Fri Oct 29, 2010 9:03 am
by d503
d503 wrote:
old thread wrote:Fri Oct 15, 2010 3:28 pm DERP.


I resemble your DERP and raise you a HERP-DERP. ;)

Thanks for moving it.

Re: My Power Auras

PostPosted: Fri Oct 29, 2010 10:02 am
by Doxa
Thanks!

Re: LF your Power Aura Strings

PostPosted: Fri Oct 29, 2010 3:08 pm
by _Chloe
Merged again. USE THE SEARCH FEATURE.

Re: LF your Power Aura Strings

PostPosted: Fri Oct 29, 2010 5:02 pm
by Nikachelle
Let me start off by saying that I *absolutely* robbed the graphics and colours idea from someone else. But I can't remember who, and as far as I remember, it wasn't on this board.

Image

As you can imagine, the yellow is the first holy power, the orange is the second holy power and the red is the third. The red makes the sonar ping noise to alert me, but I'm considering dropping it since I'm getting into the rhythm enough.

I realize it is intrusive. That was absolutely the point when I started it because I wanted to make this work for my paladin. That being said, I've gotten so used to it, that I may likely keep it that big into Cataclysm.

1 Holy Power
Code: Select all
Version:3.0.0W; b:0; g:0.949; thresholdinvert:true; icon:Spell_fire_meteorstorm; bufftype:10; texture:23; alpha:1; threshold:1; PowerType:9; y:-218; finish:0


2 Holy Power

Code: Select all
Version:3.0.0W; b:0; g:0.3333; thresholdinvert:true; icon:Spell_fire_meteorstorm; bufftype:10; texture:23; alpha:1; threshold:2; PowerType:9; size:1.07; y:-218; finish:0


3 Holy Power

Code: Select all
Version:3.0.0W; b:0; g:0.0157; thresholdinvert:true; icon:Spell_fire_meteorstorm; bufftype:10; texture:23; alpha:1; sound:23; threshold:3; PowerType:9; size:1.55; y:-218; finish:0


And for lols and rainbows, here's my show all:

Image

Re: LF your Power Aura Strings

PostPosted: Fri Oct 29, 2010 8:06 pm
by Arnock
hmm, methinks I should go about installing this addon.


Also, is there a way to disable the default blizz "power aura" thing they added with 4.0?

Re: LF your Power Aura Strings

PostPosted: Fri Oct 29, 2010 9:20 pm
by Nikachelle
Arnock wrote:Also, is there a way to disable the default blizz "power aura" thing they added with 4.0?

You can do that natively.

Go to your Interface Options > Combat > Show Spell Alerts

If you want built in Power Auras, keep it toggled. If you want it OFF, untoggle the option.

Re: LF your Power Aura Strings

PostPosted: Sat Oct 30, 2010 11:48 am
by Arnock
Thanks, Also, have a few nub questions about the addon.


I was glancing through the wiki, and it seemed that you could only have multiple conditions if all of those conditions were met (i.e. if x AND y then show icon)
Is there a way to show the texture if one of the conditions is met (i.e. if x OR y then show texture)

For example, I have 3 bars that I use to show holy power, is there a way to configure the addon to show a bar if I have either 3 holy power, or the hand of light buff (ret mastery)?





Also, Is there a way to show multiple textures from a single condition?

To use the previous example, with one rule, show all 3 holy power bars if I have the Hand of light buff active.

Re: LF your Power Aura Strings

PostPosted: Sun Oct 31, 2010 8:58 pm
by fuzzygeek
Nikachelle wrote:Image


WHAT DOES IT MEAN.

Re: LF your Power Aura Strings

PostPosted: Mon Nov 01, 2010 12:09 am
by _Chloe
fuzzygeek wrote:
Nikachelle wrote:Image


WHAT DOES IT MEAN.


DEATHWING HAS ARRIVED!

Re: LF your Power Aura Strings

PostPosted: Mon Nov 08, 2010 3:04 pm
by dmok
Arnock wrote:Is there a way to show the texture if one of the conditions is met (i.e. if x OR y then show texture)

For example, I have 3 bars that I use to show holy power, is there a way to configure the addon to show a bar if I have either 3 holy power, or the hand of light buff (ret mastery)?

If you seperate the ability names with a / character (slash), it will be an OR condition.

For example:
Horn of Winter/Strength of Earth Totem/Battle Shout
will be true when any of the 3 abilities are active





Also, Is there a way to show multiple textures from a single condition?

To use the previous example, with one rule, show all 3 holy power bars if I have the Hand of light buff active.

I think (but am not certain) that you can only have 1 texture per rule. You are, however, able to have the same texture in multiple rules

Re: LF your Power Aura Strings

PostPosted: Mon Nov 08, 2010 6:23 pm
by Øtep
I've been trying to think of things to add to my Power Auras (if anything else is needed).

Here's what I have so far...

Image

Orange - Holy Shield & Timer
Red (left) - Sacred Duty proc & Timer
Pink (right) - Reckoning proc & Stacks
Green - Corpse Tongue Coin proc & Timer & Activation Sound
Yellow - 1,2&3 stacks of Holy Power & Activation Sound
Red (bottom) - 1,2,3,4&5 stacks of Blood Reserve & Timer

I'm using the blizzard default power aura for Grand Crusader proc, but I might make my own since the blizz version seems to make 'dead' spots on the screen.
I also realise that 'Reckoning' and 'Blood Reserve' stacks probably don't need to be kept track of, but they look cool :)

Anything else I should/could be adding?

Øtep

Re: LF your Power Aura Strings

PostPosted: Wed Nov 10, 2010 4:09 am
by thenicebigfella
How I roll for now.
Image
Code: Select all
Set=Page 1@
Aura[1]=Version:4.5; b:0.1922; anim1:7; g:0.9529; thresholdinvert:true; icon:spell_holy_lightsgrace; begin:3; bufftype:10; texture:179; alpha:0.7; speed:1.5; sound:1; threshold:3; PowerType:9; size:3.19; torsion:1.36; y:-367; anim2:7; finish:3@
Aura[2]=Version:4.5; icon:Spell_Holy_BlessingOfProtection; buffname:Holy Shield; x:52; customname:st; unitn:stOnly for raid/group.; aurastext:st; owntex:true; spec2:false; size:0.2; y:-200; customsound:st; timer.enabled:true; timer.cents:false; timer.Relative:BOTTOM@
Aura[3]=Version:4.5; icon:Ability_Paladin_JudgementRed; buffname:Sacred Duty; x:-52; customname:st; unitn:stOnly for raid/group.; aurastext:st; owntex:true; size:0.2; y:-200; customsound:st; timer.enabled:true; timer.cents:false; timer.Relative:BOTTOM@
Aura[4]=Version:4.5; icon:Spell_Holy_AvengersShield; buffname:Avenger's Shield; customname:st; unitn:stOnly for raid/group.; bufftype:7; aurastext:st; owntex:true; spec2:false; size:0.2; y:-200; customsound:st@
Aura[5]=Version:4.5; icon:Spell_Holy_ArdentDefender; buffname:Ardent Defender; x:-52; customname:st; unitn:stOnly for raid/group.; aurastext:st; owntex:true; size:0.2; y:-270; customsound:st; timer.enabled:true; timer.cents:false; timer.Relative:BOTTOM@
Aura[6]=Version:4.5; anim1:7; icon:Spell_Holy_SealOfFury; buffname:Righteous Fury; x:-75; customname:st; unitn:stOnly for raid/group.; alpha:1; aurastext:st; owntex:true; isResting:0; mine:true; spec2:false; size:0.5; randomcolor:true; y:100; inverse:true; customsound:st; anim2:4@
Aura[7]=Version:4.5; icon:Spell_Holy_Restoration; buffname:Divine Protection; x:52; customname:st; unitn:stOnly for raid/group.; aurastext:st; owntex:true; size:0.2; y:-270; customsound:st; timer.enabled:true; timer.cents:false; timer.Relative:BOTTOM@
Aura[8]=Version:4.5; icon:Spell_Holy_InnerFire; buffname:Consecration; customname:st; unitn:stOnly for raid/group.; bufftype:7; aurastext:st; owntex:true; spec2:false; size:0.2; y:-270; customsound:st@
Aura[9]=Version:4.5; anim1:7; icon:Spell_Holy_SealOfVengeance; buffname:Seal of Truth; x:75; customname:st; unitn:stOnly for raid/group.; alpha:1; aurastext:st; owntex:true; isResting:0; mine:true; spec2:false; size:0.48; randomcolor:true; y:100; inverse:true; customsound:st; anim2:4@

Re: LF your Power Aura Strings

PostPosted: Mon Nov 29, 2010 3:09 pm
by thatguy
Øtep wrote:I've been trying to think of things to add to my Power Auras (if anything else is needed).

Here's what I have so far...

Orange - Holy Shield & Timer
Red (left) - Sacred Duty proc & Timer
Pink (right) - Reckoning proc & Stacks
Green - Corpse Tongue Coin proc & Timer & Activation Sound
Yellow - 1,2&3 stacks of Holy Power & Activation Sound
Red (bottom) - 1,2,3,4&5 stacks of Blood Reserve & Timer

Anything else I should/could be adding?

Øtep


Not sure if you need to add it but maybe:

Availability of Divine Plea? Avenging Wrath? Divine Protection?
Timer on Forebearance?

Re: LF your Power Aura Strings

PostPosted: Wed Jan 12, 2011 10:59 am
by Carbonite
What is the string to show me if Divine Plea is available to cast?

Also does anyone have a string for when blessing of the might is not active or seal of insight or truth?

Carb

Re: LF your Power Aura Strings

PostPosted: Wed Jan 19, 2011 5:12 pm
by DrSlump
Divine Plea
Code: Select all
Version:4.9; icon:Spell_Holy_Aspiration; buffname:Divine Plea; bufftype:15; isResting:0; inVehicle:0; ismounted:0

Re: LF your Power Aura Strings

PostPosted: Tue Feb 08, 2011 7:20 am
by Lionnis
Carbonite wrote:What is the string to show me if Divine Plea is available to cast?

Also does anyone have a string for when blessing of the might is not active or seal of insight or truth?

Carb


Code: Select all
Seal of Truth

Version:3.0.0W; b:0; g:0.9098; icon:Spell_Holy_SealOfVengeance; buffname:Seal of Truth; x:-6; texture:19; mine:true; stacksOperator:=; combat:true; y:105; inverse:true


Code: Select all
Seal of Insight

Version:4.9; b:0; g:0.9098; icon:Spell_Holy_HealingAura; buffname:Seal of Insight; x:-6; texture:19; owntex:true; mine:true; stacksOperator:=; spec1:false; y:105; inverse:true


I think we need an official power auras thread if we don't already have one with a front page full of useful exports and what not. This thread isn't bad but a lot at 8 pages long, some information might be a pita to get to.

Re: LF your Power Aura Strings

PostPosted: Thu Feb 10, 2011 11:33 am
by Poclain
Looking for a string to show if Holy Shock is on cooldown.

Can't figure it out myself. :(

Re: LF your Power Aura Strings

PostPosted: Sun Mar 06, 2011 1:18 am
by laZzy
how can i put sound on an imported power aura pack ? i hit edit but no sounds are available... pls help, want to put a sound when a sacared duty procs

Re: LF your Power Aura Strings

PostPosted: Thu Mar 31, 2011 1:16 pm
by Staatt
Hi -- can someone copy and paste their power aura to show that you have Tricks cast on you and the remaining duration? I did a search but couldn't find it. The one I set up isn't working.

Thanks!

Re: LF your Power Aura Strings

PostPosted: Tue Mar 27, 2012 4:01 am
by tailstrike
Hi

I cant seem to get the Power Aura string on the actual string thread to work for prot paladin

I copied it as it was there and the only ones that will show when active is sacred duty, ardent defender and the holy power one.

Any chance anyone can look at these? Or am i doing it wrong?

Re: LF your Power Aura Strings

PostPosted: Tue Mar 27, 2012 6:16 am
by Nikachelle
tailstrike wrote:Hi

I cant seem to get the Power Aura string on the actual string thread to work for prot paladin

I copied it as it was there and the only ones that will show when active is sacred duty, ardent defender and the holy power one.

Any chance anyone can look at these? Or am i doing it wrong?

You used the "Import" function right?

Re: LF your Power Aura Strings

PostPosted: Tue Mar 27, 2012 7:11 am
by tailstrike
Yeah import set i used - THey just dont seem to be showing when they should ir RF and SoT both off and no aura showing

Re: LF your Power Aura Strings

PostPosted: Tue Mar 27, 2012 7:12 am
by Nikachelle
tailstrike wrote:Yeah import set i used - THey just dont seem to be showing when they should ir RF and SoT both off and no aura showing

A lot of power aura strings are set up to only show when you're in combat. Were you in combat when you noticed they weren't working?