Libram + Spell Macro
Moderators: Fridmarr, Worldie, Aergis, _Chloe
11 posts
• Page 1 of 1
Libram + Spell Macro
Hello!
I've been working on some _VERY_ complex macros lately. So this is the plan. There's currently 2 good librams in the game.
wowhead.com/?item=40707 (Badges of Heroism)
and
http://www.wowhead.com/?item=45145 (Badges of Conquest)
So my plan is to get there 2 librams to stack using 2 macros
Remember, these are VERY VERY VERY complex macros:
/equip Libram of the Sacred Shield
/cast Holy Shield
/equip Libram of Obstruction
/Cast JUdgement of Wisdom
I've tryed them out and they are working fine.
What i'm trying to do is so the macro tooltip is the icon of the spellnot the libram, and also show the cooldown of that spell
Over and Out / SEMPX
EDIT:Very compelx macros, huh?
I've been working on some _VERY_ complex macros lately. So this is the plan. There's currently 2 good librams in the game.
wowhead.com/?item=40707 (Badges of Heroism)
and
http://www.wowhead.com/?item=45145 (Badges of Conquest)
So my plan is to get there 2 librams to stack using 2 macros
Remember, these are VERY VERY VERY complex macros:
/equip Libram of the Sacred Shield
/cast Holy Shield
/equip Libram of Obstruction
/Cast JUdgement of Wisdom
I've tryed them out and they are working fine.
What i'm trying to do is so the macro tooltip is the icon of the spellnot the libram, and also show the cooldown of that spell
Over and Out / SEMPX
EDIT:Very compelx macros, huh?
When in doubt, call sempx :>
- Sempx
- Posts: 21
- Joined: Mon Mar 09, 2009 2:27 pm
- Location: Umeå, Sweden
Re: Libram + Spell Macro
I'm not sure if I can handle such complexity!
It might drop your FPS quite a bit to be thrown in such macros, but you could try
#show SpellName
That'd probably do it. I personally use #showtooltip, but that might blow up your computer with macros like that.
It might drop your FPS quite a bit to be thrown in such macros, but you could try
#show SpellName
That'd probably do it. I personally use #showtooltip, but that might blow up your computer with macros like that.
I rule.
- moduspwnens
- Moderator
- Posts: 6211
- Joined: Tue Nov 06, 2007 12:28 pm
- Location: Shattered Hand
Re: Libram + Spell Macro
moduspwnens wrote:but you could try #show SpellName
That'd probably do it. I personally use #showtooltip, but that might blow up your computer with macros like that.
It shows the icon, but a darker then usuall and it doesnt show the cooldown.
When in doubt, call sempx :>
- Sempx
- Posts: 21
- Joined: Mon Mar 09, 2009 2:27 pm
- Location: Umeå, Sweden
Re: Libram + Spell Macro
Does this really work? Every since TBC came out, I've heard these rumors. Yet every time I try to make macros that do the job (and I've tried all kinds), the libram swap sets of the GCD (during combat) and it takes pounding the button twice (and burning two GCD's) to get the macro to do both (swap the libram and trigger the spell).
If someone can make it work, that's great, but I'm afraid I'm going to need them to draw me some pictures and use small words to explain it to me. Cause every time I try it in combat, it just makes one big mess.
So, is there any way to write a macro that does a libram swap and casts a spell all in one GCD?
EDIT: In Combat! It does me no good to have a macro that works at the bank in Dalaran but does jack all when I'm trading blows with bosses in Ulduar (or swinging at a target dummy in SW).
If someone can make it work, that's great, but I'm afraid I'm going to need them to draw me some pictures and use small words to explain it to me. Cause every time I try it in combat, it just makes one big mess.
So, is there any way to write a macro that does a libram swap and casts a spell all in one GCD?
EDIT: In Combat! It does me no good to have a macro that works at the bank in Dalaran but does jack all when I'm trading blows with bosses in Ulduar (or swinging at a target dummy in SW).
- Popeman
- Posts: 6
- Joined: Mon Aug 10, 2009 2:35 pm
Re: Libram + Spell Macro
I found this month old thread from over in the Advanced Training forum:
viewtopic.php?f=6&t=23992
It looks like the two-libram-swap is possible but probably not advisable. It works, but it prolongs the GCD of the two spells that are macroed by a fraction of a second. So, unless you have perfect conditions (no lag, stand still, etc.) your 969 gets pushed back enough that Holy Shield wears off for a fraction of a second. If you're comfortable running the risk of having a fraction of a second where your block chance is so low, then you can stack the effect of both librams to up your block value for the rest of the 10 seconds. But, even in the best of conditions, you're losing a bit of TPS as a result of the delay being built into your 969.
viewtopic.php?f=6&t=23992
It looks like the two-libram-swap is possible but probably not advisable. It works, but it prolongs the GCD of the two spells that are macroed by a fraction of a second. So, unless you have perfect conditions (no lag, stand still, etc.) your 969 gets pushed back enough that Holy Shield wears off for a fraction of a second. If you're comfortable running the risk of having a fraction of a second where your block chance is so low, then you can stack the effect of both librams to up your block value for the rest of the 10 seconds. But, even in the best of conditions, you're losing a bit of TPS as a result of the delay being built into your 969.
- Popeman
- Posts: 6
- Joined: Mon Aug 10, 2009 2:35 pm
Re: Libram + Spell Macro
Jerey-Darkspear wrote:http://maintankadin.failsafedesign.com/viewtopic.php?f=9&t=25043
*cough* Seven threads down, gentlemen.
You still haven't solved the problem, ie. the global cooldown is extended on the spells the swap is tied to. This results in a prolonged 969 (which is really a 10/6/10 now). Therefore, your HS will drop off before you can reapply it. That's the dilemma, the only way you can stack the block value of both librams is to run the risk of having no HS up for about half a second.
- Popeman
- Posts: 6
- Joined: Mon Aug 10, 2009 2:35 pm
Re: Libram + Spell Macro
Popeman wrote:Jerey-Darkspear wrote:http://maintankadin.failsafedesign.com/viewtopic.php?f=9&t=25043
*cough* Seven threads down, gentlemen.
You still haven't solved the problem, ie. the global cooldown is extended on the spells the swap is tied to. This results in a prolonged 969 (which is really a 10/6/10 now). Therefore, your HS will drop off before you can reapply it. That's the dilemma, the only way you can stack the block value of both librams is to run the risk of having no HS up for about half a second.
Well, that depends entirely on your latency and how many libram swaps you do in any given Holy Shield duration. As long as you're not adding more than one second, you won't have gaps in Holy Shield. To determine the max number of libram swaps allowed, divide 1000 by your latency and there you go - don't do more than this number, chopped at the decimal. For me, this number is around four to five libram swaps, but I know for the Oceanic people, this is limited to two or one.
The more important question is why you would sacrifice near to 100% uptime on LoD for 400'ish to 800'ish (depending on if you use just LoO or both LoO and LotSS) block value. It is worth libram swapping the two BV if you don't have LoD from a survival standpoint, but after you get LoD, you need to think about what you're doing there.
Disclaimer: The previous statement is contingent upon LoD having the six second internal cooldown invoking on equip that I've seen mentioned somewhere on these forums. If such an internal cooldown doesn't exist, then maybe we can try to find a way to make this work for your latency.
- Jerey-Darkspear
- Posts: 183
- Joined: Tue Jun 17, 2008 12:38 am
Re: Libram + Spell Macro
My latency is routinely between 285 and 325 with my addons. With your math, I should be able to get three swaps a rotation.
However, standing in front of a combat dummy using either a macro or a libram addon, having two swaps (one during judgment and one during either consecration or holy shield) results in a GCD "hickup" during the swap that causes holy shield to fall off before it can be refreshed. It isn't a long downtime, but it is enough to cause a concern.
My connection is a cable modem in the mid-US. I'm not trying to do anything fancy, just have the two block librams swap back and forth and guarantee HS is up 100% of the time. I'll worry about getting a third libram in the rotation if/when I can get two to work successfully.
However, standing in front of a combat dummy using either a macro or a libram addon, having two swaps (one during judgment and one during either consecration or holy shield) results in a GCD "hickup" during the swap that causes holy shield to fall off before it can be refreshed. It isn't a long downtime, but it is enough to cause a concern.
My connection is a cable modem in the mid-US. I'm not trying to do anything fancy, just have the two block librams swap back and forth and guarantee HS is up 100% of the time. I'll worry about getting a third libram in the rotation if/when I can get two to work successfully.
- Popeman
- Posts: 6
- Joined: Mon Aug 10, 2009 2:35 pm
Re: Libram + Spell Macro
#showtooltip Holy Shield
/equip Libram of the Sacred Shield
/cast Holy Shield
and
#showtooltip Judgement of ________
/equip Libram of Obstruction
/cast Judgement of _________
hope this helps.
/equip Libram of the Sacred Shield
/cast Holy Shield
and
#showtooltip Judgement of ________
/equip Libram of Obstruction
/cast Judgement of _________
hope this helps.
- Adgavin
- Posts: 1
- Joined: Tue Sep 01, 2009 8:09 pm
Re: Libram + Spell Macro
Adgavin wrote:#showtooltip Holy Shield
/equip Libram of the Sacred Shield
/cast Holy Shield
and
#showtooltip Judgement of ________
/equip Libram of Obstruction
/cast Judgement of _________
hope this helps.
Sorry, those don't work in combat.
- Popeman
- Posts: 6
- Joined: Mon Aug 10, 2009 2:35 pm
11 posts
• Page 1 of 1
Return to Add-ons, UI, and Macros
Who is online
Users browsing this forum: No registered users and 2 guests
